{"id":29693,"date":"2017-04-23T21:14:57","date_gmt":"2017-04-23T19:14:57","guid":{"rendered":"http:\/\/www.makerslide-machines.com\/?p=29693"},"modified":"2018-09-07T19:03:44","modified_gmt":"2018-09-07T17:03:44","slug":"simuler-un-usinage","status":"publish","type":"post","link":"http:\/\/www.makerslide-machines.xyz\/old\/2017\/04\/23\/simuler-un-usinage\/","title":{"rendered":"Simuler un usinage"},"content":{"rendered":"

[:en][et_pb_section admin_label=\u00a0\u00bbsection\u00a0\u00bb][et_pb_row admin_label=\u00a0\u00bbrow\u00a0\u00bb][et_pb_column type=\u00a0\u00bb4_4″][et_pb_post_title admin_label=\u00a0\u00bbTitre du poste\u00a0\u00bb title=\u00a0\u00bbon\u00a0\u00bb meta=\u00a0\u00bbon\u00a0\u00bb author=\u00a0\u00bbon\u00a0\u00bb date=\u00a0\u00bbon\u00a0\u00bb categories=\u00a0\u00bbon\u00a0\u00bb comments=\u00a0\u00bbon\u00a0\u00bb featured_image=\u00a0\u00bbon\u00a0\u00bb featured_placement=\u00a0\u00bbbelow\u00a0\u00bb parallax_effect=\u00a0\u00bbon\u00a0\u00bb parallax_method=\u00a0\u00bbon\u00a0\u00bb text_orientation=\u00a0\u00bbleft\u00a0\u00bb text_color=\u00a0\u00bbdark\u00a0\u00bb text_background=\u00a0\u00bboff\u00a0\u00bb text_bg_color=\u00a0\u00bbrgba(255,255,255,0.9)\u00a0\u00bb module_bg_color=\u00a0\u00bbrgba(255,255,255,0)\u00a0\u00bb title_all_caps=\u00a0\u00bboff\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb]<\/p>\n

[\/et_pb_post_title][et_pb_text admin_label=\u00a0\u00bbTexte\u00a0\u00bb background_layout=\u00a0\u00bblight\u00a0\u00bb text_orientation=\u00a0\u00bbleft\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb]<\/p>\n

\nMany CAM software do not have a simulation module.
\nThe machining simulation can detect any errors before starting machining.<\/p>\n

Here is a list of simulation software :<\/strong><\/span>
\n– Camotics<\/strong> http:\/\/camotics.org\/<\/strong><\/span><\/span>  Opensource simulation software
\n– NC Corrector<\/strong> http:\/\/www.nc-corrector.inf.ua\/<\/span><\/strong><\/span>  simulation software and G-code editor<\/p>\n

The Fusion 360 software has a simulation module but no Gcode editor.
\nCan setting Fusion 360 with external editor, for external editor can use classic text editor like Notepad++
\n<\/a><\/strong>Or NC Corrector http:\/\/www.nc-corrector.inf.ua\/<\/a> <\/strong><\/p>\n

Setting external gcode editor in Fusion 360<\/strong><\/span><\/h5>\n

\"Parametrer-editeur-externe-fusion\"<\/p>\n

[\/et_pb_text][et_pb_tabs admin_label=\u00a0\u00bbOnglets\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb]<\/p>\n

[et_pb_tab title=\u00a0\u00bbWith nc corrector\u00a0\u00bb tab_font_select=\u00a0\u00bbdefault\u00a0\u00bb tab_font=\u00a0\u00bb||||\u00a0\u00bb tab_line_height=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb body_font_select=\u00a0\u00bbdefault\u00a0\u00bb body_font=\u00a0\u00bb||||\u00a0\u00bb body_line_height=\u00a0\u00bb2em\u00a0\u00bb body_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb body_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb]<\/p>\n

\"nc-corrector-1\"Need open Gcode file
\n<\/strong><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

After can see toopaths
\n<\/strong><\/p>\n

\"nc-corrector-2\"<\/p>\n

\"nc-corrector-3\"<\/p>\n

 <\/p>\n

Just start simulate now with arrows<\/strong><\/p>\n

 <\/p>\n

 <\/p>\n

 <\/p>\n

I ) Exemple of check Gcode come from Cambam<\/strong><\/span><\/span><\/h3>\n

a ) M\u00e9thod to click in different line of toolpath simulate<\/strong><\/span><\/p>\n

\"Ecran1\"<\/p>\n

Line 9 <\/strong>indicate that it’s XY plan<\/strong> choice for machining with G17 <\/strong>function
\nLine 10<\/strong> set rapid speed to 6000 mm\/mn<\/strong> with G0 <\/strong>function
\nLine 11<\/strong> set spindle speed to 1000 tr\/mn<\/strong> with S1000 <\/strong>function<\/p>\n

 Line 12, can see the rapid toolpath with<\/span><\/span> ( G0) function<\/span>
\n Line 13, other rapid toolpath G0 the tool go to 1mm to stock surface<\/span><\/span>
\n<\/span>
\nWhen you click in toolpath line you can see
\n– coordinate of start and end of line
\n– length of line
\n– the Gcode line match<\/span><\/span><\/span><\/strong><\/p>\n

\"Ecran2\"<\/p>\n

 <\/p>\n

b ) M\u00e9thod to start simulate step by step<\/span><\/strong><\/span><\/p>\n

http:\/\/www.makerslide-machines.com\/wp-content\/uploads\/2017\/04\/simulation-nc-corrector.mp4<\/a><\/video><\/div>\n

 <\/p>\n

[\/et_pb_tab][et_pb_tab title=\u00a0\u00bbWith fusion 360″ tab_font_select=\u00a0\u00bbdefault\u00a0\u00bb tab_font=\u00a0\u00bb||||\u00a0\u00bb tab_line_height=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb body_font_select=\u00a0\u00bbdefault\u00a0\u00bb body_font=\u00a0\u00bb||||\u00a0\u00bb body_line_height=\u00a0\u00bb2em\u00a0\u00bb body_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb body_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb]<\/p>\n

A ) Simulation with Fusion 360<\/strong><\/span><\/span><\/p>\n

\"simulate-milling\"<\/h4>\n

<\/h4>\n

B ) External Gcode Editor of Fusion 360<\/strong><\/span><\/p>\n

With Autodesk Fusion’s CAM functionality, when you post your code out it goes to the brackets software that’s great for editing, but wouldn’t it be great if you could post your code into and actual NC Editor? Well, you can…and it’s free! It’s called NC Corrector, and you can download it here: http:\/\/www.nc-corrector.inf.ua\/index_EN.htm<\/p>\n

Once you’ve downloaded the NC Corrector, follow these steps to set it up as your default editor.<\/p>\n

    \n
  1.  Go to the Preferences page<\/strong>.<\/li>\n<\/ol>\n

    \"fusion-nc-corrector1\"<\/p>\n

      \n
    1. Go to the CAM<\/strong> under the General group<\/strong> and click the browse button by External Editor<\/strong>.<\/li>\n<\/ol>\n

      \"fusion-nc-corrector2\"<\/p>\n

        \n
      1. Find the .exe file<\/strong> for the NC Corrector software<\/strong>.<\/li>\n<\/ol>\n

        \"\"<\/p>\n

        Select it and hit Open. Click OK on the Preferences dialog box and then next time you post code, it will post into and open the NC Corrector software<\/span>.<\/p>\n

        [\/et_pb_tab]<\/p>\n

        [\/et_pb_tabs][et_pb_comments admin_label=\u00a0\u00bbCommentaires\u00a0\u00bb show_avatar=\u00a0\u00bbon\u00a0\u00bb show_reply=\u00a0\u00bbon\u00a0\u00bb show_count=\u00a0\u00bbon\u00a0\u00bb background_layout=\u00a0\u00bblight\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb custom_button=\u00a0\u00bboff\u00a0\u00bb button_letter_spacing=\u00a0\u00bb0″ button_use_icon=\u00a0\u00bbdefault\u00a0\u00bb button_icon_placement=\u00a0\u00bbright\u00a0\u00bb button_on_hover=\u00a0\u00bbon\u00a0\u00bb button_letter_spacing_hover=\u00a0\u00bb0″]<\/p>\n

        [\/et_pb_comments][\/et_pb_column][\/et_pb_row][\/et_pb_section][:zh][et_pb_section admin_label=\u00a0\u00bbsection\u00a0\u00bb][et_pb_row admin_label=\u00a0\u00bbrow\u00a0\u00bb][et_pb_column type=\u00a0\u00bb4_4″][et_pb_post_title admin_label=\u00a0\u00bbTitre du poste\u00a0\u00bb title=\u00a0\u00bbon\u00a0\u00bb meta=\u00a0\u00bbon\u00a0\u00bb author=\u00a0\u00bbon\u00a0\u00bb date=\u00a0\u00bbon\u00a0\u00bb categories=\u00a0\u00bbon\u00a0\u00bb comments=\u00a0\u00bboff\u00a0\u00bb featured_image=\u00a0\u00bboff\u00a0\u00bb featured_placement=\u00a0\u00bbbelow\u00a0\u00bb parallax_effect=\u00a0\u00bbon\u00a0\u00bb parallax_method=\u00a0\u00bbon\u00a0\u00bb text_orientation=\u00a0\u00bbleft\u00a0\u00bb text_color=\u00a0\u00bbdark\u00a0\u00bb text_background=\u00a0\u00bboff\u00a0\u00bb text_bg_color=\u00a0\u00bbrgba(255,255,255,0.9)\u00a0\u00bb module_bg_color=\u00a0\u00bbrgba(255,255,255,0)\u00a0\u00bb title_all_caps=\u00a0\u00bboff\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb]<\/p>\n

        [\/et_pb_post_title][et_pb_text admin_label=\u00a0\u00bbTexte\u00a0\u00bb background_layout=\u00a0\u00bblight\u00a0\u00bb text_orientation=\u00a0\u00bbleft\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb]<\/p>\n

        \nMany CAM software do not have a simulation module.
        \nThe machining simulation can detect any errors before starting machining.<\/p>\n

        Here is a list of simulation software :<\/strong><\/span>
        \n– Camotics<\/strong> http:\/\/camotics.org\/<\/strong><\/span><\/span>  Opensource simulation software
        \n– NC Corrector<\/strong> http:\/\/www.nc-corrector.inf.ua\/<\/span><\/strong><\/span>  simulation software and G-code editor<\/p>\n

        The Fusion 360 software has a simulation module but no Gcode editor.
        \nCan setting Fusion 360 with external editor, for external editor can use classic text editor like Notepad++
        \n<\/a><\/strong>Or NC Corrector         http:\/\/www.nc-corrector.inf.ua\/<\/a> <\/strong><\/p>\n

        Setting external gcode editor in Fusion 360<\/strong><\/span><\/h5>\n

        \"Parametrer-editeur-externe-fusion\"<\/p>\n

        [\/et_pb_text][et_pb_tabs admin_label=\u00a0\u00bbOnglets\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb]<\/p>\n

        [et_pb_tab title=\u00a0\u00bbWith nc corrector\u00a0\u00bb tab_font_select=\u00a0\u00bbdefault\u00a0\u00bb tab_font=\u00a0\u00bb||||\u00a0\u00bb tab_line_height=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb body_font_select=\u00a0\u00bbdefault\u00a0\u00bb body_font=\u00a0\u00bb||||\u00a0\u00bb body_line_height=\u00a0\u00bb2em\u00a0\u00bb body_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb body_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb]<\/p>\n

        \"nc-corrector-1\"Need open Gcode file
        \n<\/strong><\/p>\n

         <\/p>\n

         <\/p>\n

         <\/p>\n

        After can see toopaths
        \n<\/strong><\/p>\n

        \"nc-corrector-2\"<\/p>\n

        \"nc-corrector-3\"<\/p>\n

         <\/p>\n

        Just start simulate now with arrows<\/strong><\/p>\n

         <\/p>\n

         <\/p>\n

         <\/p>\n

        I ) Exemple of check Gcode come from Cambam<\/strong><\/span><\/span><\/h3>\n

        a ) M\u00e9thod to click in different line of toolpath simulate<\/strong><\/span><\/p>\n

        \"Ecran1\"<\/p>\n

        Line 9 <\/strong>indicate that it’s XY plan<\/strong> choice for machining with G17 <\/strong>function
        \nLine 10<\/strong> set rapid speed to 6000 mm\/mn<\/strong> with G0 <\/strong>function
        \nLine 11<\/strong> set spindle speed to 1000 tr\/mn<\/strong> with S1000 <\/strong>function<\/p>\n

         Line 12, can see the rapid toolpath with<\/span><\/span> ( G0) function<\/span>
        \n Line 13, other rapid toolpath G0 the tool go to 1mm to stock surface<\/span><\/span>
        \n<\/span>
        \nWhen you click in toolpath line you can see
        \n– coordinate of start and end of line
        \n– length of line
        \n– the Gcode line match<\/span><\/span><\/span><\/strong><\/p>\n

        \"Ecran2\"<\/p>\n

         <\/p>\n

        b ) M\u00e9thod to start simulate step by step<\/span><\/strong><\/span><\/p>\n

        http:\/\/www.makerslide-machines.com\/wp-content\/uploads\/2017\/04\/simulation-nc-corrector.mp4<\/a><\/video><\/div>\n

         <\/p>\n

        [\/et_pb_tab][et_pb_tab title=\u00a0\u00bbWith Fusion 360 Simulator module\u00a0\u00bb tab_font_select=\u00a0\u00bbdefault\u00a0\u00bb tab_font=\u00a0\u00bb||||\u00a0\u00bb tab_line_height=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb body_font_select=\u00a0\u00bbdefault\u00a0\u00bb body_font=\u00a0\u00bb||||\u00a0\u00bb body_line_height=\u00a0\u00bb2em\u00a0\u00bb body_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb body_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb]<\/p>\n

        A ) Simulation with Fusion 360<\/strong><\/span><\/span><\/p>\n

        \"simulate-milling\"<\/h4>\n

        <\/h4>\n

        B ) External Gcode Editor of Fusion 360<\/strong><\/span><\/p>\n

        With Autodesk Fusion’s CAM functionality, when you post your code out it goes to the brackets software that’s great for editing, but wouldn’t it be great if you could post your code into and actual NC Editor? Well, you can…and it’s free! It’s called NC Corrector, and you can download it here: http:\/\/www.nc-corrector.inf.ua\/index_EN.htm<\/p>\n

        Once you’ve downloaded the NC Corrector, follow these steps to set it up as your default editor.<\/p>\n

          \n
        1.  Go to the Preferences page<\/strong>.<\/li>\n<\/ol>\n

          \"fusion-nc-corrector1\"<\/p>\n

            \n
          1. Go to the CAM<\/strong> under the General group<\/strong> and click the browse button by External Editor<\/strong>.<\/li>\n<\/ol>\n

            \"fusion-nc-corrector2\"<\/p>\n

              \n
            1. Find the .exe file<\/strong> for the NC Corrector software<\/strong>.<\/li>\n<\/ol>\n

              \"\"<\/p>\n

              Select it and hit Open. Click OK on the Preferences dialog box and then next time you post code, it will post into and open the NC Corrector software<\/span>.<\/p>\n

              [\/et_pb_tab]<\/p>\n

              [\/et_pb_tabs][et_pb_comments admin_label=\u00a0\u00bbCommentaires\u00a0\u00bb show_avatar=\u00a0\u00bbon\u00a0\u00bb show_reply=\u00a0\u00bbon\u00a0\u00bb show_count=\u00a0\u00bboff\u00a0\u00bb background_layout=\u00a0\u00bblight\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb custom_button=\u00a0\u00bboff\u00a0\u00bb button_letter_spacing=\u00a0\u00bb0″ button_use_icon=\u00a0\u00bbdefault\u00a0\u00bb button_icon_placement=\u00a0\u00bbright\u00a0\u00bb button_on_hover=\u00a0\u00bbon\u00a0\u00bb button_letter_spacing_hover=\u00a0\u00bb0″]<\/p>\n

              [\/et_pb_comments][\/et_pb_column][\/et_pb_row][\/et_pb_section][:fr][et_pb_section bb_built=\u00a0\u00bb1″ admin_label=\u00a0\u00bbsection\u00a0\u00bb][et_pb_row admin_label=\u00a0\u00bbrow\u00a0\u00bb background_position=\u00a0\u00bbtop_left\u00a0\u00bb background_repeat=\u00a0\u00bbrepeat\u00a0\u00bb background_size=\u00a0\u00bbinitial\u00a0\u00bb][et_pb_column type=\u00a0\u00bb2_3″][et_pb_post_title admin_label=\u00a0\u00bbTitre du poste\u00a0\u00bb title=\u00a0\u00bbon\u00a0\u00bb meta=\u00a0\u00bbon\u00a0\u00bb author=\u00a0\u00bbon\u00a0\u00bb date=\u00a0\u00bbon\u00a0\u00bb categories=\u00a0\u00bbon\u00a0\u00bb comments=\u00a0\u00bboff\u00a0\u00bb featured_image=\u00a0\u00bboff\u00a0\u00bb featured_placement=\u00a0\u00bbbelow\u00a0\u00bb parallax_effect=\u00a0\u00bbon\u00a0\u00bb parallax_method=\u00a0\u00bboff\u00a0\u00bb text_orientation=\u00a0\u00bbleft\u00a0\u00bb text_color=\u00a0\u00bbdark\u00a0\u00bb text_background=\u00a0\u00bboff\u00a0\u00bb text_bg_color=\u00a0\u00bbrgba(255,255,255,0.9)\u00a0\u00bb module_bg_color=\u00a0\u00bbrgba(255,255,255,0)\u00a0\u00bb title_all_caps=\u00a0\u00bboff\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb parallax=\u00a0\u00bbon\u00a0\u00bb background_color=\u00a0\u00bbrgba(255,255,255,0)\u00a0\u00bb]<\/p>\n

               <\/p>\n

              [\/et_pb_post_title][et_pb_text admin_label=\u00a0\u00bbTexte\u00a0\u00bb background_layout=\u00a0\u00bblight\u00a0\u00bb text_orientation=\u00a0\u00bbleft\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb background_position=\u00a0\u00bbtop_left\u00a0\u00bb background_repeat=\u00a0\u00bbrepeat\u00a0\u00bb background_size=\u00a0\u00bbinitial\u00a0\u00bb _builder_version=\u00a0\u00bb3.4.1″]<\/p>\n

              Beaucoup de logiciels de FAO ne poss\u00e8dent pas de module de simulation.
              \nLa simulation d’usinage permet de d\u00e9tecter\u00a0d’\u00e9ventuelles erreurs avant de lancer l’usinage.<\/p>\n

              Voici une liste de logiciel de simulation :<\/strong><\/span>
              \n– Camotics<\/strong>\u00a0http:\/\/camotics.org\/<\/strong><\/span><\/span> logiciel de simulation Opensource
              \n– NC Corrector<\/strong>\u00a0http:\/\/www.nc-corrector.inf.ua\/<\/span><\/strong><\/span> \u00a0logiciel de simulation et \u00e9diteur G-Code gratuit<\/p>\n

              Le logiciel Fusion 360 poss\u00e8de un module de simulation mai celui ci n’est pas connect\u00e9 \u00e0 l’\u00e9diteur\u00a0Gcode par d\u00e9faut de Fusion 360 c’est \u00e0 dire \u00ab\u00a0Brackets\u00a0\u00bb. On ne peut pas d\u00e9rouler la simulation pas \u00e0 pas et voir en m\u00eame temps les lignes Gcode qui d\u00e9filent
              \nIl est possible cependant de param\u00e9trer un \u00e9diteur de code externe, par exemple un \u00e9diteur de texte classique comme Notepad++<\/strong><\/a><\/span><\/span> ou l’\u00e9diteur Nc corrector<\/span><\/span><\/strong><\/p>\n

              Param\u00e9trage d’un \u00e9diteur\u00a0Gcode externe dans FUSION 360<\/strong><\/span><\/span><\/h4>\n

              \"Parametrer-editeur-externe-fusion\"<\/p>\n

              [\/et_pb_text][\/et_pb_column][et_pb_column type=\u00a0\u00bb1_3″][et_pb_text _builder_version=\u00a0\u00bb3.4.1″ custom_margin=\u00a0\u00bb10px|10px|10px|10px\u00a0\u00bb custom_padding=\u00a0\u00bb10px|10px|10px|10px\u00a0\u00bb border_width_all=\u00a0\u00bb1px\u00a0\u00bb border_color_all=\u00a0\u00bb#0c71c3″ box_shadow_style=\u00a0\u00bbpreset2″]<\/p>\n

              Simulation Gcode en ligne<\/strong><\/span><\/span><\/p>\n

              G-code simulator\u00a0 :<\/span><\/span><\/strong> https:\/\/nraynaud.github.io\/webgcode\/<\/a><\/span><\/p>\n

              Opensource, possibilit\u00e9 de t\u00e9l\u00e9charger l’application sur Github<\/a>\u00a0 et de l’installer sur son propre serveur.
              \nAttention :<\/strong><\/span> les trajectoire en d\u00e9placement rapide \u00ab\u00a0GO\u00a0\u00bb ne sont pas visible sur la vue 3D en haut.<\/p>\n

              Nc viewer :<\/span><\/strong> https:\/\/ncviewer.com\/<\/span><\/a><\/span><\/p>\n

              N’oubliez pas de cliquer sur \u00ab\u00a0Plot\u00a0\u00bb pour voir les trajectoires qui apparaissent en marron pour les d\u00e9placement rapide \u00ab\u00a0G0\u00a0\u00bb et bleu pour les d\u00e9placements d’usinage \u00ab\u00a0G0 G1 G2 G3″<\/p>\n

              [\/et_pb_text][et_pb_button _builder_version=\u00a0\u00bb3.4.1″ button_text=\u00a0\u00bbSimuler le Gcode avec le serveur Makerslide-machines\u00a0\u00bb button_url=\u00a0\u00bbhttps:\/\/www.makerslide-machines.xyz\/gcode\/\u00a0\u00bb \/][\/et_pb_column][\/et_pb_row][et_pb_row][et_pb_column type=\u00a0\u00bb4_4″][et_pb_tabs admin_label=\u00a0\u00bbOnglets\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb background_position=\u00a0\u00bbtop_left\u00a0\u00bb background_repeat=\u00a0\u00bbrepeat\u00a0\u00bb background_size=\u00a0\u00bbinitial\u00a0\u00bb _builder_version=\u00a0\u00bb3.4.1″][et_pb_tab title=\u00a0\u00bbNC Corrector\u00a0\u00bb tab_font_select=\u00a0\u00bbdefault\u00a0\u00bb tab_font=\u00a0\u00bb||||\u00a0\u00bb tab_line_height=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb body_font_select=\u00a0\u00bbdefault\u00a0\u00bb body_font=\u00a0\u00bb||||\u00a0\u00bb body_line_height=\u00a0\u00bb2em\u00a0\u00bb body_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb body_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb _builder_version=\u00a0\u00bb3.4.1″] \"nc-corrector-1\"Il faut ouvrir le fichier Gcode <\/strong> \u00a0 \u00a0 \u00a0 Ensuite on peut visualiser les parcours d’outils <\/strong> \"nc-corrector-2\" \"nc-corrector-3\" \u00a0 Reste plus qu’a lancer la simulation<\/strong><\/p>\n

               <\/p>\n

               <\/p>\n

              I ) Exemple de v\u00e9rification d’un fichier Gcode venant de Cambam<\/strong><\/span><\/span><\/h3>\n

              a ) M\u00e9thode en cliquant sur les lignes de parcours de la simulation<\/strong><\/span> \"Ecran1\" La ligne 9<\/strong> indique que l’usinage se fera par rapport au plan XY<\/strong> avec la fonction G17<\/strong> La ligne 10<\/strong> param\u00e8tre la vitesse \u00e0 6000 mm\/mn<\/strong> pour la fonction G0<\/strong> La ligne 11<\/strong> fixe la valeur de vitesse de rotation \u00e0 1000 tr\/mn<\/strong> avec la fonction S1000<\/strong> \u00a0Ligne 12, <\/span>on peut voir le parcours d’outil concernant la en vitesse rapide ( G0)<\/span> \u00a0Ligne 13, <\/span>un autre d\u00e9placement rapide qui am\u00e8ne l’outil \u00e0 1mm de la surface mati\u00e8re <\/span> En cliquant sur les lignes de parcours\u00a0d’outil dans la simulation nous obtenons – les coordonn\u00e9es du d\u00e9but de la ligne et de la fin de la ligne – la longueur de la ligne – la ligne Gcode qui correspond<\/span><\/span><\/span><\/strong> \"Ecran2\" \u00a0 b\u00a0) M\u00e9thode en d\u00e9roulant la simulation pas \u00e0 pas<\/span><\/strong><\/span><\/p>\n

              http:\/\/www.makerslide-machines.com\/wp-content\/uploads\/2017\/04\/simulation-nc-corrector.mp4<\/a><\/video><\/div>\n

              [\/et_pb_tab][et_pb_tab title=\u00a0\u00bbSimulation avec fusion 360″ tab_font_select=\u00a0\u00bbdefault\u00a0\u00bb tab_font=\u00a0\u00bb||||\u00a0\u00bb tab_line_height=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb tab_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb body_font_select=\u00a0\u00bbdefault\u00a0\u00bb body_font=\u00a0\u00bb||||\u00a0\u00bb body_line_height=\u00a0\u00bb2em\u00a0\u00bb body_line_height_tablet=\u00a0\u00bb2em\u00a0\u00bb body_line_height_phone=\u00a0\u00bb2em\u00a0\u00bb _builder_version=\u00a0\u00bb3.4.1″] \u00a0 \u00a0 A ) Simulation avec Fusion 360<\/strong><\/span><\/span><\/p>\n

               <\/p>\n

               <\/p>\n

              \"simulate-milling\"<\/h4>\n

              \"simulation\"<\/h4>\n

              B ) Param\u00e9trage d’un \u00e9diteur externe dans fusion 360 <\/strong><\/span> \"Parametrer-editeur-externe-fusion\" \u00a0 [\/et_pb_tab][et_pb_tab _builder_version=\u00a0\u00bb3.4.1″ title=\u00a0\u00bbAfficher largeur de coupe avec CAMBAM\u00a0\u00bb use_background_color_gradient=\u00a0\u00bboff\u00a0\u00bb background_color_gradient_start=\u00a0\u00bb#2b87da\u00a0\u00bb background_color_gradient_end=\u00a0\u00bb#29c4a9″ background_color_gradient_type=\u00a0\u00bblinear\u00a0\u00bb background_color_gradient_direction=\u00a0\u00bb180deg\u00a0\u00bb background_color_gradient_direction_radial=\u00a0\u00bbcenter\u00a0\u00bb background_color_gradient_start_position=\u00a0\u00bb0%\u00a0\u00bb background_color_gradient_end_position=\u00a0\u00bb100%\u00a0\u00bb background_color_gradient_overlays_image=\u00a0\u00bboff\u00a0\u00bb parallax=\u00a0\u00bboff\u00a0\u00bb parallax_method=\u00a0\u00bbon\u00a0\u00bb background_size=\u00a0\u00bbcover\u00a0\u00bb background_position=\u00a0\u00bbcenter\u00a0\u00bb background_repeat=\u00a0\u00bbno-repeat\u00a0\u00bb background_blend=\u00a0\u00bbnormal\u00a0\u00bb allow_player_pause=\u00a0\u00bboff\u00a0\u00bb background_video_pause_outside_viewport=\u00a0\u00bbon\u00a0\u00bb tab_text_shadow_style=\u00a0\u00bbnone\u00a0\u00bb body_text_shadow_style=\u00a0\u00bbnone\u00a0\u00bb]<\/p>\n

              Pour le logiciel CAMBAM, il n’y a pas de simulation d’usinage int\u00e9gr\u00e9e, mais il y a cependant une fonction tr\u00e8s utile, \u00ab\u00a0Afficher largeur de coupe<\/strong><\/span>\u00a0\u00bb cela permet de voir quelle mati\u00e8re va \u00eatre r\u00e9ellement enlev\u00e9e.<\/p>\n

              \"\"<\/p>\n

              [\/et_pb_tab][et_pb_tab _builder_version=\u00a0\u00bb3.4.1″ title=\u00a0\u00bbSimuler l’usinage et les d\u00e9placements machine avec NC-Simul\u00a0\u00bb use_background_color_gradient=\u00a0\u00bboff\u00a0\u00bb background_color_gradient_start=\u00a0\u00bb#2b87da\u00a0\u00bb background_color_gradient_end=\u00a0\u00bb#29c4a9″ background_color_gradient_type=\u00a0\u00bblinear\u00a0\u00bb background_color_gradient_direction=\u00a0\u00bb180deg\u00a0\u00bb background_color_gradient_direction_radial=\u00a0\u00bbcenter\u00a0\u00bb background_color_gradient_start_position=\u00a0\u00bb0%\u00a0\u00bb background_color_gradient_end_position=\u00a0\u00bb100%\u00a0\u00bb background_color_gradient_overlays_image=\u00a0\u00bboff\u00a0\u00bb parallax=\u00a0\u00bboff\u00a0\u00bb parallax_method=\u00a0\u00bbon\u00a0\u00bb background_size=\u00a0\u00bbcover\u00a0\u00bb background_position=\u00a0\u00bbcenter\u00a0\u00bb background_repeat=\u00a0\u00bbno-repeat\u00a0\u00bb background_blend=\u00a0\u00bbnormal\u00a0\u00bb allow_player_pause=\u00a0\u00bboff\u00a0\u00bb background_video_pause_outside_viewport=\u00a0\u00bbon\u00a0\u00bb tab_text_shadow_style=\u00a0\u00bbnone\u00a0\u00bb body_text_shadow_style=\u00a0\u00bbnone\u00a0\u00bb]<\/p>\n

              L’usinage 5 Axe est beaucoup plus complexe, il y a beaucoup plus de probabilit\u00e9 de collision entre l’outil, la pi\u00e8ce, le porte pi\u00e8ce …<\/p>\n

              Un logiciel comme NC-Simul permet de simuler non seulement les d\u00e9placements de l’outils et de la pi\u00e8ces mais aussi de l’ensemble de la machine.<\/p>\n

              Voici une d\u00e9monstration de Fusion 360 —> Hsmworks —-> NC Simul<\/span><\/span><\/p>\n

              http:\/\/www.makerslide-machines.xyz\/wp-content\/uploads\/2017\/04\/Fusion-360-Inventor-nc-simul.mp4<\/a><\/video><\/div>\n

               <\/p>\n

              [\/et_pb_tab][\/et_pb_tabs][et_pb_comments admin_label=\u00a0\u00bbCommentaires\u00a0\u00bb show_avatar=\u00a0\u00bbon\u00a0\u00bb show_reply=\u00a0\u00bbon\u00a0\u00bb show_count=\u00a0\u00bboff\u00a0\u00bb background_layout=\u00a0\u00bblight\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb custom_button=\u00a0\u00bboff\u00a0\u00bb button_letter_spacing=\u00a0\u00bb0″ button_use_icon=\u00a0\u00bbdefault\u00a0\u00bb button_icon_placement=\u00a0\u00bbright\u00a0\u00bb button_on_hover=\u00a0\u00bbon\u00a0\u00bb button_letter_spacing_hover=\u00a0\u00bb0″ border_radii=\u00a0\u00bbon||||\u00a0\u00bb]<\/p>\n

               <\/p>\n

              [\/et_pb_comments][\/et_pb_column][\/et_pb_row][\/et_pb_section][:]<\/p>\n","protected":false},"excerpt":{"rendered":"

              [:en][et_pb_section admin_label=\u00a0\u00bbsection\u00a0\u00bb][et_pb_row admin_label=\u00a0\u00bbrow\u00a0\u00bb][et_pb_column type=\u00a0\u00bb4_4″][et_pb_post_title admin_label=\u00a0\u00bbTitre du poste\u00a0\u00bb title=\u00a0\u00bbon\u00a0\u00bb meta=\u00a0\u00bbon\u00a0\u00bb author=\u00a0\u00bbon\u00a0\u00bb date=\u00a0\u00bbon\u00a0\u00bb categories=\u00a0\u00bbon\u00a0\u00bb comments=\u00a0\u00bbon\u00a0\u00bb featured_image=\u00a0\u00bbon\u00a0\u00bb featured_placement=\u00a0\u00bbbelow\u00a0\u00bb parallax_effect=\u00a0\u00bbon\u00a0\u00bb parallax_method=\u00a0\u00bbon\u00a0\u00bb text_orientation=\u00a0\u00bbleft\u00a0\u00bb text_color=\u00a0\u00bbdark\u00a0\u00bb text_background=\u00a0\u00bboff\u00a0\u00bb text_bg_color=\u00a0\u00bbrgba(255,255,255,0.9)\u00a0\u00bb module_bg_color=\u00a0\u00bbrgba(255,255,255,0)\u00a0\u00bb title_all_caps=\u00a0\u00bboff\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb] [\/et_pb_post_title][et_pb_text admin_label=\u00a0\u00bbTexte\u00a0\u00bb background_layout=\u00a0\u00bblight\u00a0\u00bb text_orientation=\u00a0\u00bbleft\u00a0\u00bb use_border_color=\u00a0\u00bboff\u00a0\u00bb border_color=\u00a0\u00bb#ffffff\u00a0\u00bb border_style=\u00a0\u00bbsolid\u00a0\u00bb] Many CAM software do not have a simulation module. The machining simulation can detect any errors before starting machining. Here is a list […]<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[142],"tags":[],"class_list":["post-29693","post","type-post","status-publish","format-standard","hentry","category-preparer-et-creer-gcode"],"_links":{"self":[{"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/posts\/29693","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/comments?post=29693"}],"version-history":[{"count":8,"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/posts\/29693\/revisions"}],"predecessor-version":[{"id":33359,"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/posts\/29693\/revisions\/33359"}],"wp:attachment":[{"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/media?parent=29693"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/categories?post=29693"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.makerslide-machines.xyz\/old\/wp-json\/wp\/v2\/tags?post=29693"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}